Radius Server Msgauth; Radius Server Primary - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

radius server msgauth

This command enables the message authenticator attribute to be used for the specified RADIUS
Authenticating server.
Format
radius server msgauth <ipaddr|dnsname>
Mode Global Config
Field Description
ip addr The IP address of the server.
dnsname The DNS name of the server.
no radius server msgauth
The version of this command disables the message authenticator attribute to be used for the
no
specified RADIUS Authenticating server.
Format
no radius server msgauth <ipaddr|dnsname>
Mode Global Config

radius server primary

This command specifies a configured server that should be the primary server in the group of
servers which have the same server name. Multiple primary servers can be configured for each
number of servers that have the same name. When the RADIUS client has to perform transactions
with an authenticating RADIUS server of specified name, the client uses the primary server that
has the specified server name by default. If the RADIUS client fails to communicate with the
primary server for any reason, the client uses the backup servers configured with the same server
name. These backup servers are identified as the 'Secondary' type.
Format
radius server primary {<ipaddr|dnsname>}
Mode Global Config
Management Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
10-57