Ip Dhcp Snooping Database Write-Delay; Ip Dhcp Snooping Binding - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Default local
Format
ip dhcp snooping database {local|tftp://hostIP/filename}
Mode Global Config

ip dhcp snooping database write-delay

Use this command to configure the interval in seconds at which the DHCP Snooping database will
be persisted. The interval value ranges from 15 to 86400 seconds.
Default 300 seconds
Format
ip dhcp snooping database write-delay <in seconds>
Mode Global Config
no ip dhcp snooping database write-delay
Use this command to set the write delay value to the default value.
Format
no ip dhcp snooping database write-delay
Mode Global Config

ip dhcp snooping binding

Use this command to configure static DHCP Snooping binding.
Format
ip dhcp snooping binding <mac-address> vlan <vlan id> <ip address>
interface <interface id>
Mode Global Config
no ip dhcp snooping binding <mac-address>
Use this command to remove the DHCP static entry from the DHCP Snooping database.
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-122