Show Ip Ospf Virtual-Link - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Metric Val The metric value is applied based on the TOS. It defaults to the least metric of the type of
service among the interfaces to other areas. The OSPF cost for a route is a function of the
metric value.
Import Summary Controls the import of summary LSAs into stub areas.
LSA

show ip ospf virtual-link

This command displays the OSPF Virtual Interface information for a specific area and neighbor.
The <areaid> parameter identifies the area and the <neighbor> parameter identifies the
neighbor's Router ID.
Format
show ip ospf virtual-link <areaid> <neighbor>
Modes • Privileged EXEC
• User EXEC
Term Definition
Area ID The area id of the requested OSPF area.
Neighbor Router The input neighbor Router ID.
ID
Hello Interval The configured hello interval for the OSPF virtual interface.
Dead Interval The configured dead interval for the OSPF virtual interface.
Iftransit Delay The configured transit delay for the OSPF virtual interface.
Interval
Retransmit The configured retransmit interval for the OSPF virtual interface.
Interval
Authentication The configured authentication type of the OSPF virtual interface.
Type
State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
router, and backup designated router. This is the state of the OSPF interface.
Neighbor State The neighbor state.
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-81