Show Ip Ospf Range - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Term Definition
Retransmission An integer representing the current length of the retransmission queue of the specified
Queue Length
neighbor router Id of the specified interface.
The following shows example CLI display output for the command.
(Switch) #show ip ospf neighbor 170.1.1.50
Interface.....................................0/17
Neighbor IP Address...........................170.1.1.50
Interface Index...............................17
Area Id.......................................0.0.0.2
Options.......................................0x2
Router Priority...............................1
Dead timer due in (secs)......................15
Up Time.......................................0 days 2 hrs 8 mins 46 secs
State.........................................Full/BACKUP-DR
Events........................................4
Retransmission Queue Length...................0

show ip ospf range

This command displays information about the area ranges for the specified <areaid>. The
<areaid> identifies the OSPF area whose ranges are being displayed.
Format
show ip ospf range <areaid>
Modes • Privileged EXEC
• User EXEC
Term Definition
Area ID The area id of the requested OSPF area.
IP Address An IP address which represents this area range.
Subnet Mask A valid subnet mask for this area range.
Lsdb Type The type of link advertisement associated with this area range.
Advertisement The status of the advertisement. Advertisement has two possible settings: enabled or
disabled.
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-79