Show Eventlog; Show Hardware - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show eventlog

This command displays the event log, which contains error messages from the system. The event
log is not cleared on a system reset. The <unit> is the switch identifier.
Format
show eventlog [<unit>]
Mode Privileged EXEC
Term Definition
File The file in which the event originated.
Line The line number of the event.
Task Id The task ID of the event.
Code The event code.
Time The time this event occurred.
Unit The unit for the event.
Note: Event log information is retained across a switch reset.

show hardware

This command displays inventory information for the switch.
Note: The show version command and the show hardware command display the same
information. In future releases of the software, the show hardware command will
not be available. For a description of the command output, see the command
version" on page
Format
show hardware
Mode Privileged EXEC
Utility Commands
9-8.
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
"show
9-7