Show Hosts - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show hosts

Use this command to display the default domain name, a list of name server hosts, the static and
the cached list of host names and addresses <ame> ranges from 1-255 characters. This command
displays both IPv4 and IPv6 entries. ..
Format
show hosts [name]
Mode User EXEC
Field Description
Host Name Domain host name.
Default Domain Default domain name.
Default Domain Default domain list.
List
Domain Name DNS client enabled/disabled.
Lookup
Number of Number of time to retry sending Domain Name System (DNS) queries.
Retries
Retry Timeout Amount of time to wait for a response to a DNS query.
Period
Name Servers Configured name servers.
Example: The following shows example CLI display output for the command.
<Switch> show hosts
Host name......................... Device
Default domain.................... gm.com
Default domain list............... yahoo.com, Stanford.edu, rediff.com
Domain Name lookup................ Enabled
Number of retries................. 5
Retry timeout period.............. 1500
Name servers (Preference order)... 176.16.1.18 176.16.1.19
Configured host name-to-address mapping:
Host
------------------------------ ------------------------------
accounting.gm.com
Host Total
--------------- -------- ------
Utility Commands
Addresses
176.16.8.8
Elapsed Type
--------
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
Addresses
--------------
9-60