Dos-Control Icmp; Dos-Control Smacdmac - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no dos-control l4port
This command disables L4 Port Denial of Service protections.
Format
no dos-control l4port
Mode Global Config

dos-control icmp

This command enables Maximum ICMP Packet Size Denial of Service protections. If the mode is
enabled, Denial of Service prevention is active for this type of attack. If ICMP Echo Request
(PING) packets ingress having a size greater than the configured value, the packets will be
dropped if the mode is enabled.
Default disabled <512>
Format
dos-control icmp [<0-1023>]
Mode Global Config
no dos-control icmp
This command disables Maximum ICMP Packet Size Denial of Service protections.
Format
no dos-control icmp
Mode Global Config

dos-control smacdmac

This command enables Source MAC address = Destination MAC address (SMAC=DMAC)
Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for this
type of attack. If packets ingress with SMAC=DMAC, the packets will be dropped if the mode is
enabled. This command is only available on FSM72xxRS switches.
Default disabled
Format
dos-control smacdmac
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-196