Show Sflow Agent; Show Sflow Pollers - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

Format
no sflow poller {<rcvr-indx> | interval <poll-interval>}
Mode Interface Config

show sflow agent

The sFlow agent collects time-based sampling of network interface statistics and flow-based
samples. These are sent to the configured sFlow receivers. Use this command to display the sFlow
agent information.
Format
show sflow agent
Mode Privileged EXEC
Field Description
sFlow Version Uniquely identifies the version and implementation of this MIB. The version string must
have the following structure: MIB Version; Organization; Software Revision where:
• MIB Version: '1.3', the version of this MIB.
• Organization: Netgear.
• Revision: 1.0
IP Address The IP address associated with this agent.
Example: The following shows example CLI display output for the command.
(switch) #show sflow agent
sFlow Version.................................. 1.3;Netgear;1.0
IP Address..................................... 10.131.12.66

show sflow pollers

Use this command to display the sFlow polling instances created on the switch. Use "-" for range.
Format
show sflow pollers
Mode Privileged EXEC
Utility Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
9-87