Show Port-Channel System Priority - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
Format
show port-channel {<logical unit/slot/port> | all}
Mode • Privileged EXEC
• User EXEC
Term Definition
Logical Valid unit, slot, and port number separated by forward slashes.
Interface
Port-Channel The name of this port-channel (LAG). You may enter any string of up to 15 alphanumeric
Name
characters.
Link State Indicates whether the Link is up or down.
Admin Mode May be enabled or disabled. The factory default is enabled.
Type The status designating whether a particular port-channel (LAG) is statically or
dynamically maintained.
• Static - The port-channel is statically maintained.
• Dynamic - The port-channel is dynamically maintained.
Mbr Ports A listing of the ports that are members of this port-channel (LAG), in unit/slot/port
notation. There can be a maximum of eight ports assigned to a given port-channel
(LAG).
Device Timeout For each port, lists the timeout (long or short) for Device Type (actor or partner).
Port Speed Speed of the port-channel port.
Ports Active This field lists ports that are actively participating in the port-channel (LAG).
Load Balance The load balance option associated with this LAG. See
Option
page

show port-channel system priority

Use this command to display the port-channel system priority.
Format
show port-channel system priority
Mode Privileged EXEC
Switching Commands
3-107.
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
"port-channel load-balance" on
3-112