NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual page 154

macfilter addsrc
This command adds the interface to the source filter set for the MAC filter with the MAC address
of <macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify
a valid VLAN.
Format
macfilter addsrc <macaddr> <vlanid>
Mode Interface Config
no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC address
of <macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-
byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter must
identify a valid VLAN.
Format
no macfilter addsrc <macaddr> <vlanid>
Mode Interface Config
macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC address
of <macaddr> and <vlanid>. You must specify the <macaddr> parameter as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify
a valid VLAN.
Format
macfilter addsrc all <macaddr> <vlanid>
Mode Global Config
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC
address of <macaddr> and VLAN of <vlanid>. You must specify the <macaddr> parameter
as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-118