Spanning-Tree Forceversion; Spanning-Tree Forward-Time - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

spanning-tree forceversion

This command sets the Force Protocol Version parameter to a new value.
Default 802.1s
Format
spanning-tree forceversion <802.1d | 802.1s | 802.1w>
Mode Global Config
• Use 802.1d to specify that the switch transmits ST BPDUs rather than MST BPDUs (IEEE
802.1d functionality supported).
• Use 802.1s to specify that the switch transmits MST BPDUs (IEEE 802.1s functionality
supported).
• Use 802.1w to specify that the switch transmits RST BPDUs rather than MST BPDUs (IEEE
802.1w functionality supported).
no spanning-tree forceversion
This command sets the Force Protocol Version parameter to the default value.
Format
no spanning-tree forceversion
Mode Global Config

spanning-tree forward-time

This command sets the Bridge Forward Delay parameter to a new value for the common and
internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the
value being greater than or equal to "(Bridge Max Age / 2) + 1".
Default 15
Format
spanning-tree forward-time <4-30>
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-15