Passwords Lock-Out; Show Passwords Configuration - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

passwords lock-out

Use this command to strengthen the security of the switch by locking user accounts that have
failed login due to wrong passwords. When a lockout count is configured, a user that is logged in
must enter the correct password within that count. Otherwise the user will be locked out from
further switch access. Only a user with read/write access can re-activate a locked user account.
Password lockout does not apply to logins from the serial console. The valid range is 1-5. The
default is 0, or no lockout count enforced.
Default 0
Format
passwords lock-out <1-5>
Mode Global Config
no passwords lock-out
Use this command to set the password lock-out count to the default value.
Format
no passwords lock-out
Mode Global Config

show passwords configuration

Use this command to display the configured password management settings.
Format
show passwords configuration
Mode Privileged EXEC
Term
Minimum Password
Length
Password History
Password Aging
Lockout Attempts
Management Commands
Definition
Minimum number of characters required when changing passwords.
Number of passwords to store for reuse prevention.
Length in days that a password is valid.
Number of failed password login attempts before lockout.
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
10-36