Sshcon Timeout; Show Ip Ssh - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no sshcon maxsessions
This command sets the maximum number of allowed SSH connection sessions to the default
value.
Format
no sshcon maxsessions
Mode Privileged EXEC

sshcon timeout

This command sets the SSH connection session timeout value, in minutes. A session is active as
long as the session has been idle for the value set. The time is a decimal value from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
Default 5
Format
sshcon timeout <1-160>
Mode Privileged EXEC
no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
Format
no sshcon timeout
Mode Privileged EXEC

show ip ssh

This command displays the ssh settings.
Format
show ip ssh
Mode Privileged EXEC
Management Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
10-18