Exit Discarding Changes; Load Setup Defaults; Discard Changes; Flash Utility - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

To save the changes and exit Setup, press
without saving your changes.

Exit Discarding Changes

Use this option to exit Setup without recording any changes you may have made. After you
select "Exit Discarding Changes, the program displays this message:
Exit Discarding Changes?
Press Enter to Continue
Press ESC to Abort
To exit Setup without saving the changes, press
return to the Exit submenu.

Load Setup Defaults

To load all the default Setup values in the Setup menus, select "Load Setup Defaults" from
the Exit Submenu. Reloading the defaults does not affect any set passwords. The program
displays this message:
Load Setup Defaults?
Press Enter to Continue
Press ESC to Abort
To load the defaults shipped with the system, press
submenu without affecting your changes.

Discard Changes

To undo any changes you have made in the Setup menus since Setup was last saved, select
"Discard Changes." The program displays this message:
Discard Changes?
Press Enter to Continue
Press ESC to Abort
To reset all changes made in the current session of Setup, press
to the Exit submenu without affecting your changes.

FLASH UTILITY

The system BIOS resides on a flash ROM in the system. The flash ROM can be updated
should it ever become necessary. This feature allows the ROM BIOS chip to be flashed with
a new BIOS code through software, rather than replacing the chip.
Setup and Operation
. Press to return to the Exit submenu
Enter Esc
. To save your changes, press
Enter
. Press
Enter
Esc
to return to the Exit
Esc
. Press to return
Enter Esc
2-31
to