Restoring Individual Files - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

2-42 Setup and Operation
The System Recovery option
T
provides a full system recovery. This means you'll be able to restore the system to
its original factory-shipped state.
T
reformats hard drive C and erases all information on the disk.
T
then restores files on drive C from the CD Restore disc.
Before System Recovery, you will need to
T
back up all the data files to an external storage device (diskette, tape, or zip
cartridge drive). System Recovery removes all data.
T
be prepared with software installation diskettes of any software application
programs that you installed yourself.
After System Recovery, you will need to
T
restore to the hard disk all the data files that you backed up before System
Recovery.
T
reinstall any software application program that you installed yourself.
The following sections describe each of these options. If the preinstalled software becomes
unusable, see "Recovery Options" later in this section.

Restoring Individual Files

Here's how to restore individual files to the hard disk:
With system power on, insert the CD Restore disc into the CD-ROM reader.
1.
2. On the Windows 95 desktop, double click
3. Double click the CD-ROM reader
appears.
4. At the System Restore screen, click
agreement appears.
Read the license agreement and click
5.
Files screen appears. The screen is divided into two areas:
T
1 Select files to restore — This is where you select
the specific files you want to restore.
T
2 Check list of files to be restored — This area lets
you check the files you selected for restoration.
My Computer
(F:) icon. The NEC System Restore screen
OK to restore individual files. A license
to continue. The Restore Individual
I agree
.