NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual page 57

NumLock
The NumLock field controls whether the NumLock key on the keyboard will be "On" or
"Off" at bootup. The default is "Off."
Speaker
The Speaker field allows you to turn the onboard speaker (for multimedia systems) on or
off. The options are "Enabled" or "Disabled." The default for the Speaker field is
"Enabled."
Setup Prompt
The Setup Prompt field allows you to disable the "Press <F1> Key To Enter Setup"
message displayed during POST. It does not control access, just the message. This field can
be either "Enabled" or "Disabled." The default is "Enabled."
Hard Disk Pre-Delay
The Hard Disk Pre-Delay field causes the BIOS to wait a specified time before accessing
the first hard disk drive. Setting a pre-delay provides the system with some time to identify
any additional drives before the standard hard drive initializes. The default is "Disabled."
The delay times are as follows:
T
3 seconds
T
6 seconds
T
9 seconds
T
12 seconds
T
15 seconds
T
21 seconds
T
30 seconds
T
Disabled (default).
NOTE: "De-turbo" does not reduce the CPU
speed to 8 MHz. If "De-turbo" is selected, it will
automatically "Disable" the System Cache.
Setup and Operation 2-15