Enter Password And Set Administrative Password; Unattended Start - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

T
Enter Password
This field allows you to enable a user level password during POST and to enter
Setup. When both the "User Password is" and "Administrative Password is" are
"Enabled," only the Administrative Password gives you full access to all Setup
fields. This field can be either "Enabled" or "Disabled." The default is "Disabled."
T
Set Administrative Password
This field allows you to enable an administrative level password during POST and
to enter Setup. When both the "User Password is" and "Administrative Password
is" are "Enabled," only the Administrative Password gives you full access to all
Setup fields. This field can be either "Enabled" or "Disabled." The default is
"Disabled."
When the Administrative password is set, you can configure User Privilege levels
for limited access, no access, view only, or full access.

Enter Password and Set Administrative Password

Enable either or both the User or Administrative Passwords and a dialog box appears with
the following prompts. Passwords are not case-sensitive.
To set a password, type the password and press
.
Enter
Enter new password: [
Confirm new password:
If there is already a User or Administrative Password, then a dialog box with the following
prompts appears.
Enter current password: [
Enter new password: [
Confirm new password:
When both User and Administrative Passwords are set, the Clear User Password field
appears. Press to clear a User Password and display a Confirmation dialog box.
Enter

Unattended Start

The Unattended Start field controls the point at which the User Password is required. The
Unattended Start field can only be set if a User Password is in effect.
Disabled (default) prompts the user for the password before the system boots. The text
string prompt "Enter Password (1)" is displayed.
. Reenter the password and press
Enter
]
[ ]
]
]
[ ]
Setup and Operation 2-29