Matrox Mystique Video Drivers - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

5. Read all the directions that appear in the 371SBIDE HELP window. Then follow
the directions with this one exception: remove the Standard IDE Device
Controller before removing the PCI IDE Controller. Take care not to restart the
system from the Devices Manager window.
Restart the system manually, according to the last step in the 371SBIDE HELP
6.
window. After the system restarts, the New Hardware Found window appears.
Click . The System Settings Change window appears.
7. OK
8. Click Yes to restart the system and to complete the installation process.

Matrox Mystique Video Drivers

Load the Matrox Mystique Video Drivers into a system with Windows 95 as follows.
Insert the PowerMate Professional Series Driver CD into the CD-ROM reader.
1.
From the Windows 95 desktop, click
2.
and click
Windows Explorer
3. From the Explorer window, double click the CD-ROM drive icon.
4. Access the folder containing the video drivers by clicking the following folders in
succession:
Double click
5.
Select English and click
6.
the Choose destination location box comes up in the screen. The default path in
the box should be
Click
7. Next
default.
NOTE: Remove the Standard IDE Device
Controller before removing the Primary PCI IDE
Controller.
NOTE: Perform the procedures in
"Preparation," "NEC 16X CD-ROM Drivers,"
and "PIIX3 IDE Drivers" before installing video
drivers.
Do not install video drivers from Windows 95
while in Safe Mode.
.
Win95 , Video , Matrox
to bring up the Language window.
Setup
. The MGA PowerDesk Setup screen appears, and
Next
C:\Program Files\Matrox MGA PowerDesk
to bring up the Program selection box. All programs are checked by
Setup and Operation
on the taskbar, point to
Start
, and Disk1 . The Disk1 window opens.
2-51
,
Programs
.