Changing Display Properties; Windows 95 - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

Changing Display Properties

The following procedure provides instructions on how to load new video drivers to change
the properties of the display. The display properties that you can set include the screen
resolution, the number of colors displayed, and the video refresh rate.
The procedure required to change video drivers depends on whether you are using
Windows 95 or Windows NT 4.0. Follow the instructions below depending on the
operating system.
For information about the resolutions, colors, and refresh rates supported by the video
drivers, see "Specifications" in Section 1.

Windows 95

From the Windows 95 desktop, press the right mouse button and click on
1.
Properties.
The Display Properties window appears.
Figure 2-11 Display Properties Window – Windows 95
NOTE: A multifrequency monitor, such as an
®
NEC MultiSync monitor, is required to access
the extended graphics mode.
NOTE: The appearance of the Windows 95
desktop may vary slightly from the one shown.
Setup and Operation 2-39