Diagnosing And Solving Problems - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

Message
Primary IDE Controller
Resource Conflict
Primary Input Device Not
Found
Secondary IDE Controller
Resource Conflict
Serial Port 1 Resource
Conflict
Serial Port 2 Resource
Conflict
Static Device Resource
Conflict
System Board Device
Resource Conflict

Diagnosing and Solving Problems

One beep indicates that the system has completed its POST test. If intermittent beeping
occurs, power off the system and try again. If the beeping persists, see Table 4-4. The table
summarizes problems that may develop during system operation and lists (in sequential
order) suggested corrective actions.
Maintenance and Troubleshooting
Table 4-3 PCI Error Messages
Description
The primary IDE controller has requested a resource that is
already in use.
The designated primary input device (keyboard, mouse, or
other, if input is redirected) could not be found.
The secondary IDE controller has requested a resource that is
already in use.
Serial port 1 has requested a resource that is already in use.
Serial port 2 has requested a resource that is already in use.
A non Plug and Play ISA card has requested a resource that is
already in use.
A non Plug and Play ISA card has requested a resource that is
already in use.
4-11