Power-On Com1 Ring - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

2-16 Setup and Operation
Typematic Rate Programming
The parameter controls whether the default user configuration values are used for
Typematic Rate Delay and Typematic Rate.
T
Default sets the Typematic Delay to 500 msec and Typematic Rate to 15.
T
Override provides the following two options. These options allow you to
customize the values.
Typematic Rate Delay
The Typematic Rate Delay field controls how long it takes for the keyboard auto-repeat
function to start when a keyboard key is held down. The delay times are as follows:
T
250 msec (default)
T
500 msec
T
750 msec
T
1000 msec.
Typematic Rate
The Typematic Rate Delay field controls the speed characters repeat when you hold down a
keyboard key. The higher the number is, the faster the repeat. Delay times are as follows:
T
6 char/sec (default)
T
8 char/sec
T
10 char/sec
T
12 char/sec
T
15 char/sec
T
20 char/sec
T
24 char/sec
T
30 char/sec.

Power-On COM1 Ring

If a telephony device is installed, this field enables the system to power on in response to an
incoming call. This field can be either "Enabled" or "Disabled." The default is "Disabled."