Driver Installation For The Windows Nt Operating System; Preparation; Piix3 Ide Drivers - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

Click . The Copying Files... window appears. Change the path in the window
11. OK
to
E:\win95
assigned to the CD-ROM reader — it may or may not be
Click . The Open window appears. Click
12. OK
appears. Click
13. Close the System Properties window.

Driver Installation for the Windows NT Operating System

The following procedures describe how to load the drivers for a system with the Windows
NT 4.0 operating system.

Preparation

Perform the following procedure before installing the IDE, video, or audio drivers:
From the Windows NT desktop, click
1.
Windows NT Explorer
2. In the Exploring menu, click
Click OK .

PIIX3 IDE Drivers

Load the PIIX3 IDE Drivers into a system with Windows NT as follows.
Insert the PowerMate Professional Series Driver CD into the CD-ROM reader.
1.
From the Windows NT desktop, click
2.
Programs
3. Select the CD-ROM drive, double click the
folder to C:\
4. From the Windows NT desktop, double click the following icons:
Computer
opens.
5. Click the Drivers
the Drivers menu.
where E:\ represents the CD-ROM reader. Use the letter actually
. The System Properties window appears.
OK
.
View
NOTE: The system cannot play audio CDs or
CD-I formatted CDs after the PIIX3 drivers are
installed.
folder, and click
Windows NT Explorer
.
, Control Panel , and
tab. The currently installed SCSI adapter drivers are listed in
Setup and Operation
. The Copying Files... window
OK
, point to
Start Programs
, point to Options , and select
on the taskbar, point to the
Start
.
Winnt folder, and copy the
SCSI Adapters . The SCSI Adapters window
2-53
.
E
, and click
Show all files
piix3ide
My
.