Windows Nt 4.0 Application Cd Installation Instructions; Mcafee Virusscan Installation - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

1. With system power on, insert the CD Restore disc into the CD-ROM reader.
2. Turn system power off.
Turn on system power. The System Recovery screen provides information about
3.
the restore process. Read this information.
You can choose one of the following two options:
T
Continue — Proceeds with the recovery program.
T
Quit — Exits the recovery program back to the operating system.
4. Click Continue
appears.
5. Read the license agreement and click
Recovery screen appears.
The Start System Recovery screen states that all the files will be removed and that
6.
this process is irreversible. At the "Are you sure?" prompt, click
The system files are restored and the System Recovery Completed screen appears.
Remove the CD and restart the computer.
WINDOWS NT
4.0
Use these instructions with the PowerMate Professional Series Windows NT 4.0
Application CD to install the following applications on PowerMate Professional Series
computers:
T
McAfee VirusScan
T
LANDesk Client Manager 3.0 version 1.1e.

McAfee VirusScan Installation

Use the following procedures to install McAfee VirusScan using the Windows NT
Application CD.
1. Insert the PowerMate Professional Series Windows NT Application CD into the
CD-ROM reader.
to proceed with the System Recovery. A license agreement
NOTE: Information on restoring software
drivers and Windows NT 4.0 applications may be
found in the following subsections.
APPLICATION CD INSTALLATION INSTRUCTIONS
version 2.5.3
Setup and Operation
I agree to continue. The Start System
2-45
to continue.
Yes