Yamaha Audio Drivers - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

YAMAHA Audio Drivers

Load the Yamaha Audio Drivers into a system with Windows NT as follows.
Insert the PowerMate Professional Series Driver CD into the CD-ROM reader.
1.
2. From the Windows NT desktop, double click the
click the Control Panel
the Multimedia Properties window.
3. Click the Devices
4. Highlight Unlisted or Updated Drivers
Click
5. Browse
Select the CD-ROM drive and double click the following folders in succession:
6.
,
winnt audio
7. Click OK . The Install Driver window reappears showing the drive and path
selected in the previous step.
8. Click OK . In the Add Unlisted or Updated Driver window,
System(English)
9. If a Driver Exists window appears, click
The Install Drivers window appears. Change the path field to
10.
E:\winnt\audio\yamaha\nt40
the letter actually assigned to the CD-ROM reader — it may or may not be
11. Click OK . The Yamaha OPL3-SA Series Driver window appears. The following
settings are recommended:
Wave:
MPU401:
Click to accept the settings.
12. OK
13. In the System Setting Changes window, click
icon, and double click the
tab. Highlight
in the Install Driver window.
, and . Click
yamaha
should be highlighted.
NOTE: Be sure to click
indicates that the driver exists.
, where E:\ represents the CD-ROM reader. Use
I/O Address:
IRQ:
DMA:
Enable MPU401 (checked)
I/O Address:
IRQ:
Setup and Operation
My Computer
Multimedia
Audio Devices and click
and click OK .
.
nt4.0
New .
if a message
New
530h
5
DRQ1
330h
5
Restart Now
2-55
icon, double
icon to bring up
Add .
OPL3SA Sound
.
E
to reboot the system.