Exit Menu; Exit Saving Changes; Exit Discarding Changes; Load Setup Defaults - NEC PowerMate Pro150 Series Service Manual

Enabled completely boots the system (including running CONFIG.SYS and
AUTOEXEC.BAT), then locks the keyboard. The User Password must be
entered to unlock it. The BIOS does not provide any prompt string.
Security Hot Key (CTRL-ALT-)
The Security Hot Key field is used to lock the keyboard when you step away from
the system. When you press
numeric key is defined be the user) the system enters secure mode (locks the
keyboard).
When this Hot Key combination is entered the Num Lock, Caps Lock, and Scroll
Lock lamps on the keyboard will flash in sequence, indicating that the system is in
secure mode.

Exit Menu

Selecting "Exit" from the menu bar displays the following exit options. Click on a topic for
a description of the Exit Menu options. Note that Esc does not exit this menu. You must
select one of the items from the menu or menu bar to exit.
n

Exit Saving Changes

n

Exit Discarding Changes

n

Load Setup Defaults

n
Discard Changes.
Exit Saving Changes
After making your selections on the Setup menus, always select "Exit Saving Changes" to
make them operative.
When "Exit Saving Changes," has been selected, the program displays this message:
To save the changes and exit Setup press
without affecting your changes.
Exit Discarding Changes
Use this option to exit Setup without recording any changes you may have made. After you
select "Exit Discarding Changes, the program displays this message:
CTRL + ALT + alpha-numeric key
Exit Saving Changes?
Press Enter to Continue
Press ESC to Abort
Enter
Exit Discarding Changes?
Press Enter to Continue
Press ESC to Abort
Setup and Operation
. Press to return to the Exit submenu
Esc
2-31
(the alpha-