Adding Internal Options; System Unit Cover Replacement - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

3-6 Option Installation
Slide the cover forward to meet the front panel.
4.
Secure the cover by tightening the three thumb screws. Lock the system with a
5.
padlock if you desire.
Connect the monitor, keyboard, mouse, and any other external options to the rear
6.
of the system unit.
Plug in the power cable(s).
7.

ADDING INTERNAL OPTIONS

This subsection provides instructions for installing the following options:
T
expansion boards
T
SIMM upgrade
T
processor upgrade
T
video upgrade
T
data storage devices.
Figure 3-3 System Unit Cover Replacement
NOTE: The cover fits tightly. If the cover does
not slide all the way to the front panel, place one
hand on the front of the unit while you slide the
cover forward from the rear.