Matrox Mystique Video Drivers - NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual

2-54 Setup and Operation
6. Select IDE-CD-ROM (Atapi 1.2) / Dual-Channel PCI IDE Controller
Remove . Click
deletion.
7. Click Add
Click
8. Have Disk
text field to:
Click . The Install from Disk window reappears displaying
9. OK
Bus Master IDE Controller
10. Click OK . The Windows NT Setup window appears. Click
the drivers already exist. Change the path in the text field to:
11. Click Continue
12. Remove the CD and click

Matrox Mystique Video Drivers

Load the Matrox Mystique Video Drivers into a system with Windows NT as follows.
1. Insert the PowerMate Professional Series Driver CD into the CD-ROM reader.
From the Windows NT desktop, click
2.
Programs
Select the CD-ROM drive and double click the following folders in succession:
3.
,
Winnt Video
4. Double click
appears. Verify that the default selection is
.
drivers
5. Click Install
displayed is
6. Click OK . The Program Selection window appears.
Click . The MGA Setup Information window appears.
7. OK
Click . The screen changes as the installation proceeds. Do not click the
8. OK
mouse until the System Settings Change window appears.
9. Click Yes
to restart the computer.
10. After the system restarts, configure and test the display settings. Click
the Display Settings display.
Yes in the Remove Drivers window to confirm the driver
to add the new driver. The Install Driver window appears.
. The Install from Disk window appears. Change the path in the
.
C:\piix3ide
.
. The Systems Settings Change window appears.
Yes to restart the computer.
folder, and click
Windows NT Explorer
, , and
Matrox NT4.0
Setup . The MGA PowerDesk and driver installation window
. The Installation Path window appears. Verify that the path
C:\Program Files\MGA NT PowerDesk\
when the Systems Settings Change window appears with the prompt
on the taskbar, point to the
Start
.
.
Install MGA PowerDesk and
.
and click
Intel PIIX PCI
New if prompted that
C:\piix3ide .
OK to exit