NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual page 64

2-22 Setup and Operation
If there are no latency-sensitive cards in the system, but I/O intensive applications are being
run, the value can be increased to slightly improve performance.
Memory Error Detection
Memory Error Detection sets the type of error detection or correction. This field appears
when either ECC or Parity SIMMs are detected. Parity and ECC (36-bit) SIMMs may be
configured to run as either one. The default is "Disabled." The following choices are
available:
T
Disabled (default)
T
Parity
T
ECC.
Onboard Audio
Disables the onboard audio on the system board. The default is "Enabled" on all systems.
Banks 0 and 1 SIMM Detected
These fields cannot be entered; they are information fields only. These fields display either
"Fast Page Mode," "EDO Mode," or "None installed," depending upon what the BIOS
detects.
Power Management Configuration
When the cursor is placed in the Power Management Configuration field, you can select it
by pressing . The Power Management Submenu appears for setting parameters that
Enter
affect the power-saving features.
Power Management Submenu
The Power Management Submenu lets you check or change the Advanced Power
Management (APM) parameter. Selecting the Advanced Power Management field enables
or disables power management support in BIOS.
Power management reduces the amount of energy used after specified periods of inactivity.
The APM menu offers you the choice of operating the system in a full-on state or standby
state with partial power reduction when idle.