NEC POWERMATE PROFESSIONAL - SERVICE MANUAL 05-1997 Service Manual page 68

2-26 Setup and Operation
ISA Shared Memory Address
The ISA Shared Memory Address field is only displayed when an ISA Shared Memory Size
has been selected. The choices are as follows:
T
C8000h (default)
T
CC000h
T
D0000h
T
D4000h
T
D8000h
T
DC000h.
IRQ 5,9,10,11 Available
Available interrupt requests (IRQ) between IRQ3 through IRQ15 will be displayed.
Interrupts consumed by onboard resources will not be visible.
Event Logging Configuration
When set to Enabled, keeps track of system events.
T
Event Log Capacity
T
Event Count Granularity
T
Event Time Granularity (mins.)
T
Event Log Control
All Events Enabled
ECC Events Disabled
All Events Disabled
NOTE: If a value of "96 KB" is selected, then
the ISA Shared Memory Base Address field can
only be set to C8000h; if "80 KB," then a value
of C8000 or CC000h, etc. can be set.
NOTE: All but one IRQ can be set to "Used By
ISA Card." One must remain available for a PCI
expansion board.
[ ]
[ ]
[ ]