Endress+Hauser Proline Promass A 100 PROFINET Operating Instructions Manual page 85

Proline Promass A 100 PROFINET
Parameter
Totalizer value 1 to n
Totalizer overflow 1 to n
* Visibility depends on order options or device settings
Endress+Hauser
Navigation
"Diagnostics" menu → Measured values → Totalizer
‣
Totalizer
Totalizer value 1 to n
Totalizer overflow 1 to n
Parameter overview with brief description
Prerequisite
One of the following options is selected
in the Assign process variable
parameter of the Totalizer 1 to n
submenu:
• Volume flow
• Mass flow
• Corrected volume flow
*
• Target mass flow
*
• Carrier mass flow
One of the following options is selected
in the Assign process variable
parameter of the Totalizer 1 to n
submenu:
• Volume flow
• Mass flow
• Corrected volume flow
*
• Target mass flow
*
• Carrier mass flow
11.5 Adapting the measuring device to the process
conditions
The following are available for this purpose:
• Basic settings using theSetup menu (→  62)
• Advanced settings using theAdvanced setup submenu (→  71)
11.6 Performing a totalizer reset
The totalizers are reset in the Operation submenu:
• Control Totalizer
• Reset all totalizers
Navigation
"Operation" menu → Totalizer handling
‣
Totalizer handling
Control Totalizer 1 to n
Description
Displays the current totalizer counter
value.
Displays the current totalizer overflow.
Operation
→  85
→  85
User interface
Signed floating-point
number
Integer with sign
→  86
85