Endress+Hauser Proline Promass A 100 PROFINET Operating Instructions Manual page 115

Proline Promass A 100 PROFINET
Diagnostic information
No.
912 Inhomogeneous
Measured variable status [from the factory]
Quality
Quality substatus
Coding (hex)
Status signal
Diagnostic behavior
1) Diagnostic behavior can be changed. This causes the overall status of the measured variable to change.
Diagnostic information
No.
913 Medium unsuitable
Measured variable status [from the factory]
Quality
Quality substatus
Coding (hex)
Status signal
Diagnostic behavior
1) Diagnostic behavior can be changed. This causes the overall status of the measured variable to change.
Diagnostic information
No.
944 Monitoring failed
Measured variable status [from the factory]
Quality
Quality substatus
Coding (hex)
Status signal
Diagnostic behavior
1) Diagnostic behavior can be changed. This causes the overall status of the measured variable to change.
Endress+Hauser
Short text
1)
Good
Ok
0x80 to 0x83
S
Warning
Short text
1)
Good
Ok
0x80 to 0x83
S
Warning
Short text
1)
Good
Ok
0x80 to 0x83
S
Warning
Remedy instructions
1. Check process cond.
2. Increase system pressure
Remedy instructions
1. Check process conditions
2. Check electronic modules or sensor
Remedy instructions
Check process conditions for Heartbeat
Monitoring
Diagnostics and troubleshooting
Influenced measured
variables
• Carrier mass flow
• Concentration
• Density
• Dynamic viscosity
• Kinematic viscosity
• Mass flow
• Sensor integrity
• Reference density
• Corrected volume flow
• Target mass flow
• Temp. compensated
dynamic viscosity
• Temp. compensated
kinematic viscosity
• Temperature
• Volume flow
Influenced measured
variables
• Carrier mass flow
• Concentration
• Density
• Dynamic viscosity
• Kinematic viscosity
• Mass flow
• Sensor integrity
• Reference density
• Corrected volume flow
• Target mass flow
• Temp. compensated
dynamic viscosity
• Temp. compensated
kinematic viscosity
• Temperature
• Volume flow
Influenced measured
variables
• Carrier mass flow
• Concentration
• Density
• Mass flow
• Sensor integrity
• Reference density
• Corrected volume flow
• Target mass flow
• Temperature
115