Endress+Hauser Proline Promass A 100 PROFINET Operating Instructions Manual page 117

Proline Promass A 100 PROFINET
Diagnostic information
No.
992 Special event 12
Measured variable status [from the factory]
Quality
Quality substatus
Coding (hex)
Status signal
Diagnostic behavior
1) Diagnostic behavior can be changed. This causes the overall status of the measured variable to change.
Endress+Hauser
Short text
1)
Good
Ok
0x80 to 0x83
F
Alarm
12.7 Pending diagnostic events
The Diagnostics menu allows the user to view the current diagnostic event and the
previous diagnostic event separately.
To call up the measures to rectify a diagnostic event:
• Via web browser →  92
• Via "FieldCare" operating tool →  93
• Via "DeviceCare" operating tool →  93
Other pending diagnostic events can be displayed in the Diagnostic list submenu
→  118.
Navigation
"Diagnostics" menu

Diagnostics
Actual diagnostics
Previous diagnostics
Operating time from restart
Operating time
Remedy instructions
Contact service
Diagnostics and troubleshooting
Influenced measured
variables
• Carrier mass flow
• Concentration
• Density
• Dynamic viscosity
• Kinematic viscosity
• Mass flow
• Sensor integrity
• Reference density
• Corrected volume flow
• Target mass flow
• Temp. compensated
dynamic viscosity
• Temp. compensated
kinematic viscosity
• Temperature
• Status
• Volume flow
→  118
→  118
→  118
→  118
117