Endress+Hauser Proline Promass A 100 PROFINET Operating Instructions Manual page 82

Operation
82
11 Operation
11.1 Reading the device locking status
Device active write protection: Locking status parameter
Navigation
"Operation" menu → Locking status
Function scope of "Locking status" parameter
Options Description
Hardware locked The write protection switch (DIP switch) for hardware locking is activated on the
I/O electronic module. This prevents write access to the parameters .
Temporarily locked Write access to the parameters is temporarily locked on account of internal
processes running in the device (e.g. data upload/download, reset etc.). Once the
internal processing has been completed, the parameters can be changed once
again.
11.2 Adjusting the operating language
Detailed information:
• To configure the operating language →  62
• For information on the operating languages supported by the measuring device
→  149
11.3 Configuring the display
Detailed information:
On the advanced settings for the local display
11.4 Reading off measured values
With the Measured values submenu, it is possible to read all the measured values.
Navigation
"Diagnostics" menu → Measured values
‣
Measured values
‣
Process variables
‣
Totalizer
11.4.1 "Measured variables" submenu
The Process variables submenu contains all the parameters needed to display the current
measured values for each process variable.
Proline Promass A 100 PROFINET
→  82
→  84
Endress+Hauser