Endress+Hauser Proline Promass A 100 PROFINET Operating Instructions Manual page 120

Diagnostics and troubleshooting
120
Info number
I1256 Display: access status changed
I1335 Firmware changed
I1361 Web server login failed
I1397 Fieldbus: access status changed
I1398 CDI: access status changed
I1444 Device verification passed
I1445 Device verification failed
I1446 Device verification active
I1447 Record application reference data
I1448 Application reference data recorded
I1449 Recording application ref. data failed
I1450 Monitoring off
I1451 Monitoring on
I1457 Measured error verification failed
I1459 I/O module verification failed
I1460 Sensor integrity verification failed
I1461 Sensor verification failed
I1462 Sensor electronic module verific. failed
I1512 Download started
I1513 Download finished
I1514 Upload started
I1515 Upload finished
I1627 Web server login successful
I1631 Web server access changed
I1649 Hardware write protection activated
I1650 Hardware write protection deactivated
12.10 Resetting the measuring device
The entire device configuration or some of the configuration can be reset to a defined state
with the Device reset parameter (→  78).
12.10.1 Function range of "Device reset" parameter
Options Description
Cancel No action is executed and the user exits the parameter.
To delivery settings Every parameter for which a customer-specific default setting was ordered is reset
to the customer-specific value. All other parameters are reset to the factory setting.

Restart device The restart resets every parameter with data stored in volatile memory (RAM) to
the factory setting (e.g. measured value data). The device configuration remains
unchanged.
Info name
This option is not visible if no customer-specific settings have been ordered.
Proline Promass A 100 PROFINET
Endress+Hauser