Endress+Hauser Proline Promass A 100 PROFINET Operating Instructions Manual page 64

Commissioning
Parameter
Mass flow unit
Mass unit
Volume flow unit
Volume unit
Corrected volume flow unit
Corrected volume unit
Density unit
Reference density unit
Density 2 unit
64
Density unit
Reference density unit
Temperature unit
Pressure unit
Parameter overview with brief description
Description
Select mass flow unit.
Effect
The selected unit applies to:
• Output
• Low flow cut off
• Simulation process variable
Select mass unit.
Select volume flow unit.
Effect
The selected unit applies to:
• Output
• Low flow cut off
• Simulation process variable
Select volume unit.
Select corrected volume flow unit.
Effect
The selected unit applies to:
Corrected volume flow parameter
(→  83)
Select corrected volume unit.
Select density unit.
Effect
The selected unit applies to:
• Output
• Simulation process variable
• Density adjustment (Expert menu)
Select reference density unit.
Select second density unit.
Proline Promass A 100 PROFINET
Selection
Unit choose list
Unit choose list
Unit choose list
Unit choose list
Unit choose list
Unit choose list
Unit choose list
Unit choose list
Unit choose list
→  64
→  64
→  65
→  65
Factory setting
Country-specific:
• kg/h (DN > 150 (6"): t/h
option)
• lb/min
Country-specific:
• kg (DN > 150 (6"): t option)
• lb
Country-specific:
• l/h (DN > 150 (6"): m³/h
option)
• gal/min (us)
Country-specific:
• l (DN > 150 (6"): m³ option)
• gal (us)
Country-specific:
• Nl/h (DN > 150 (6"): Nm³/h
option)
• Sft³/min
Country-specific:
• Nl (DN > 150 (6"): Nm³
option)
• Sft³
Country-specific:
• kg/l
• lb/ft³
Country-specific
• kg/Nl
• lb/Sft³
Country-specific:
• kg/l
• lb/ft³
Endress+Hauser