Static Wep - ZyXEL Communications MWR222 - V1.0 Manual

Table 25 No Security (WISP)
LABEL DESCRIPTION
Wireless Setup
Network Enter the name of the access point to which you are connecting.
Name
(SSID)
Security
Security Select No Security in this field.
Mode
Apply Click Apply to save your changes back to the MWR222.
Reset Click Reset to reload the previous configuration for this screen.

7.5.2 Static WEP

Use this screen if the access point to which you want to connect to uses WEP
security mode.
Figure 42 WEP (WISP)
MWR222 User's Guide
63