Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 43 Network > WAN > Wired WAN: PPPoE Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
Encapsulation
Select PPP over Ethernet if you connect to your Internet via dial-up.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.
Retype to
Type your password again to make sure that you have entered is
Confirm
correctly.
Enter the Maximum Transmission Unit (MTU) or the largest packet size
MTU Size
per frame that your MWR222 can receive and process.
Nailed-Up
Select Nailed-Up Connection if you do not want the connection to
Connection
time out.
Idle Timeout
This value specifies the time in minutes that elapses before the router
(sec)
automatically disconnects from the PPPoE server.
WAN IP Address Assignment
Get
Select this option If your ISP did not assign you a fixed IP address. This
automatically
is the default selection.
from ISP
Use Fixed IP
Select this option If the ISP assigned a fixed IP address.
Address
My WAN IP
Enter your WAN IP address in this field if you selected Use Fixed IP
Address
Address.
WAN DNS Assignment
MWR222 User's Guide
109
Advertisement
Table of Contents
Troubleshooting
