ZyXEL Communications MWR222 - V1.0 Manual page 201

Select WISP Mode if your device needs a wireless client to connect to an
existing access point.
• You cannot configure Wireless LAN settings (including WPS) and
WISP Mode
scheduling in the WISP mode.
• The IP address of the device on the local network is the same as the
IP address given to the MWR222 while in router mode (default is
192.168.10.1).
Apply Click Apply to save your settings.
Reset Click Reset to return your settings to the default (Router)
Note: If you select the incorrect System Operation Mode you may not be able to
connect to the Internet.
MWR222 User's Guide
201