ZyXEL Communications MWR222 - V1.0 Manual page 193

Table 74 Maintenance > Firmware Upgrade
LABEL DESCRIPTION
Type in the location of the file you want to upload in this field or click
File Path
Browse... to find it.
Click Browse... to find the .bin file you want to upload. Remember that
Browse... you must decompress compressed (.zip) files before you can upload
them.
Click Upload to begin the upload process. This process may take up to
Upload
two minutes.
Note: Do not turn off the MWR222 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before
logging into the MWR222 again.
The MWR222 automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 120 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status screen.
If the upload was not successful, an error message appears. Click Return to go
back to the Firmware screen.
MWR222 User's Guide
193