ZyXEL Communications MWR222 - V1.0 Manual page 188

Click Maintenance > Password.
Figure 117 Maintenance > Password
The following table describes the labels in this screen.
ble 72 Maintenance > Password
LABEL DESCRIPTION
Change your MWR222's password (recommended) using the fields as
Password Setup
shown.
Type the default password or the existing password you use to
Old Password
access the system in this field.
Type your new system password (up to 30 characters). Note that as
New Password you type a password, the screen displays an asterisk (*) for each
character you type.
Retype to
Type the new password again in this field.
Confirm
Apply Click Apply to save your changes back to the MWR222.
Reset Click Reset to begin configuring this screen afresh.
MWR222 User's Guide
188