What You Can Do; What You Need To Know; Setting Your Mwr222 To Wisp Mode - ZyXEL Communications MWR222 - V1.0 Manual

Figure 36 WISP Mode
After the MWR222 and the access point connect, the MWR222 acquires its Public
WAN IP address from the access point. The clients of the MWR222 can now surf
the Internet.

7.2 What You Can Do

• Use the Status screen to view read-only information about your MWR222.
• Use the LAN screen to set the IP address for your MWR222 acting as an access
point.
• Use the Wireless LAN screen to associate your MWR222 (acting as a wireless
client) with an existing access point.

7.3 What You Need to Know

With the exception of the LAN screen, the Monitor, Configuration and
Maintenance screens in WISP mode are similar to the ones in Router Mode.

7.3.1 Setting your MWR222 to WISP Mode

Log into the Web Configurator if you haven't already. See the Quick start
1
Guide for instructions on how to do this.
To set your MWR222 to AP Mode, go to Maintenance > Sys OP Mode >
2
General and select WISP Mode.
MWR222 User's Guide
55