Table of Contents
Advertisement
16.1
Overview
This chapter shows you how to configure static routes for your MWR222.
Each remote node specifies only the network to which the gateway is directly
connected, and the MWR222 has no knowledge of the networks beyond. For
instance, the MWR222 knows about network N2 in the following figure through
remote node Router 1. However, the MWR222 is unable to route a packet to
network N3 because it doesn't know that there is a route through the same
remote node Router 1 (via gateway Router 2). The static routes are for you to tell
the MWR222 about the networks beyond the remote nodes.
Figure 91 Example of Static Routing Topology
16.2 What You Can Do
Use the IP Static Route screen to view, add and delete routes.
16.3
IP Static Route Screen
Click Network > Static Route to open the IP Static Route screen.
MWR222 User's Guide
16 Static Route
145
Advertisement
Table of Contents
Troubleshooting
