ZyXEL Communications MWR222 - V1.0 Manual page 106

regular Ethernet.
WAN IP Address Assignment
Get Select this option If your ISP did not assign you a fixed IP address.
automatically This is the default selection.
from ISP
(Default)
Use Fixed IP Select this option If the ISP assigned a fixed IP address.
Address
Enter your WAN IP address in this field if you selected Use Fixed IP
IP Address
Address.
IP Subnet
Enter the IP Subnet Mask in this field.
Mask
Gateway IP
Enter a Gateway IP Address (if your ISP gave you one) in this field.
Address
WAN DNS Assignment
Select From ISP if your ISP dynamically assigns DNS server
information (and the MWR222's WAN IP address). The field to the
right displays the (read-only) DNS server IP address that the ISP
assigns. Select User-Defined if you have the IP address of a DNS
server. Enter the DNS server's IP address in the field to the right. If
First DNS
you chose User-Defined, but leave the IP address set to 0.0.0.0,
Server
User-Defined changes to None after you click Apply. If you set a
second choice to User-Defined, and enter the same IP address, the
Second DNS
second User-Defined changes to None after you click Apply.
Server
Select None if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a
computer in order to access it.
The MAC address section allows users to configure the WAN port's
WAN MAC MAC address by using the MWR222's MAC address, copying the MAC
Address address from a computer on your LAN or manually entering a MAC
address.
Select Factory default to use the factory assigned default MAC
Factory default
Address.
Clone the Select Clone the computer's MAC address - IP Address and enter
computer's MAC the IP address of the computer on the LAN whose MAC you are
address - IP cloning.
Address
MWR222 User's Guide
106