ZyXEL Communications MWR222 - V1.0 Manual page 196

Pressing the Reset button in this section clears all user-entered
configuration information and returns the MWR222 to its factory
defaults.
Reset
You can also press the RESET button on the rear panel to reset
the factory defaults of your MWR222. Refer to the chapter about
introducing the Web Configurator for more information on the
RESET button.
Note: If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default
MWR222 IP address (192.168.10.1). See
up your computer's IP address.
MWR222 User's Guide
Appendix C for details on how to set
196