Introducing The Web Configurator; Overview; Accessing The Web Configurator - ZyXEL Communications MWR222 - V1.0 Manual

2. Introducing the Web

2.1 Overview

This chapter describes how to access the MWR222 Web Configurator and provides
an overview of its screens.
The Web Configurator is an HTML-based management interface that allows easy
setup and management of the MWR222 via Internet browser. Use Internet
Explorer 7.0 and later or Firefox 3.0 and later versions or Safari 4.0 or later
versions. The recommended screen resolution is 1024 by 768 pixels or higher. In
order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is
enabled by default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter
functions are allowed in Internet Explorer.

2.2 Accessing the Web Configurator

Make sure your MWR222 hardware is properly connected and prepare your
1
computer or computer network to connect to the MWR222 (refer to the
Quick Start Guide).
Launch your web browser.
2
Type "http://192.168.10.1" as the website address. Your computer must
3
pbe in the same subnet in order to access this website address.
MWR222 User's Guide
Configurator
(Chapter 32) to see how to make sure these
22