ZyXEL Communications MWR222 - V1.0 Manual page 169

Table 66 Bandwidth Management Rule Configuration: User-defined Service
LABEL DESCRIPTION
Select Maximum Bandwidth or Minimum Bandwidth and specify
the maximum or minimum bandwidth allowed for the rule in kilobits
BW Budget
per second.
Enter the IP address of the destination computer.
Destination
The MWR222 applies bandwidth management to the service or
Address
application that is entering this computer.
Destination Enter the subnet netmask of the destination of the traffic for which the
Subnet bandwidth management rule applies.
Netmask
This is the port number of the destination that define the traffic type,
Destination Port
for example TCP port 80 defines web traffic.
Enter the IP address of the computer that initializes traffic for the
application or service.
Source Address
The MWR222 applies bandwidth management to traffic initiating from
this computer.
Source Subnet Enter the subnet netmask of the computer initiating the traffic for
Netmask which the bandwidth management rule applies.
This is the port number of the source that define the traffic type, for
Source Port
example TCP port 80 defines web traffic.
Select the protocol (TCP, UDP, User defined) for which the
bandwidth management rule applies.
Protocol
If you select User-defined, enter the protocol for which the bandwidth
management rule applies. For example, ICMP for ping traffic.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to exit this screen without saving.
See Appendix E for commonly used services and port numbers.
MWR222 User's Guide
169