Network Address Translation (Nat); Overview - ZyXEL Communications MWR222 - V1.0 Manual

13. Network Address
Translation (NAT)
13.1

Overview

NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP
address of a host in a packet. For example, the source address of an outgoing
packet, used within one network is changed to a different IP address known
within another network.
Each packet has two addresses – a source address and a destination address. For
outgoing packets, NAT maps private (local) IP addresses to globally unique ones
required for communication with hosts on other networks. It replaces the original
IP source address in each packet and then forwards it to the Internet. The
MWR222 keeps track of the original addresses and port numbers so incoming
reply packets can have their original values restored. The following figure
illustrates this.
Figure 84 NAT Example (use 192.168.10.x to be consistent with default value)
For more information on IP address translation, refer to RFC 1631, The IP
Network Address Translator (NAT).
MWR222 User's Guide
133