What You Can Do; General Nat Screen - ZyXEL Communications MWR222 - V1.0 Manual

13.2

What You Can Do

• Use the General screen to enable NAT and set a default server.
• Use the Application screen to forward incoming service requests to the server(s)
on your local network.
• Use the Advanced screen to change your MWR222's trigger port settings.
13.3

General NAT Screen

Use this screen to enable NAT and set a default server. Click Network > NAT >
General to open the following screen.
Figure 85 Network > NAT > General
The following table describes the labels in this screen.
Table 53 Network > NAT > General
LABEL DESCRIPTION
NAT Setup
Enable Network Network Address Translation (NAT) allows the translation of an
Address Internet protocol address used within one network (for example a
Translation private IP address used in a local network) to a different IP address
known within another network (for example a public IP address used
on the Internet).
Select the check box to enable NAT.
Default Server Setup
MWR222 User's Guide
134