ZyXEL Communications MWR222 - V1.0 Manual page 120

The following table describes the labels in this screen.
Table 46 Network > WAN > Mobile WAN
LABEL DESCRIPTION
ISP Parameters for Internet Access
Once your connection settings have been applied, click the Connect
button to connect your Mobile WAN. When the Status says
Connection Status
Disconnected the Mobile WAN is not connected. When it says
Connected it has successfully connected.
Type the user name given to you by your mobile provider. (not all
User Name
ISP needs this)
Type the password associated with the User Name above. (not all
Password
ISP needs this)
Type your password again to make sure that you have entered is
Retype to Confirm
correctly.
Access Point Name Type the name of the access point provided to you by the mobile
(APN) broadband provider. (not all ISP needs this)
Type the phone number provided by your mobile broadband
provider. The default phone number is #777 (for CDMA carriers
Phone Number
such as Sprint or Verizon). If the phone number is left as blank,
MWR222 will implicitly use #777 to connect.
Nailed-up Select Nailed-Up Connection if you do not want the connection
Connection to time out.
This value specifies the time in minutes that elapses before the
Idle Timeout
MWR222 automatically disconnects from the mobile connection.
Mobile WAN Configuration
USB Mobile WAN Select your mobile broadband provider's USB adapter from the list
Adapter or select Auto-detect to let the MWR222 find yours automatically.
Type the Pin Code given to you by your mobile broadband
Pin Code
provider.
Select this option to enable the Data Usage Counter settings.
Enable Data Usage
MWR222 User's Guide
120