Pptp Encapsulation - ZyXEL Communications MWR222 - V1.0 Manual

Select From ISP if your ISP dynamically assigns DNS server
information (and the MWR222's WAN IP address). The field to the right
displays the (read-only) DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter
First DNS
the DNS server's IP address in the field to the right. If you chose User-
Server
Defined, but leave the IP address set to 0.0.0.0, User-Defined
changes to None after you click Apply. If you set a second choice to
Second DNS
User-Defined, and enter the same IP address, the second User-
Server
Defined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a computer in
order to access it.
The MAC address section allows users to configure the WAN port's MAC
WAN MAC
address by using the MWR222's MAC address, copying the MAC address
Address
from a computer on your LAN or manually entering a MAC address.
Select Factory default to use the factory assigned default MAC
Factory default
Address.
Clone the Select Clone the computer's MAC address - IP Address and enter
computer's the IP address of the computer on the LAN whose MAC you are cloning.
MAC address -
IP Address
Set WAN MAC Select this option and enter the MAC address you want to use.
Address
Apply Click Apply to save your changes back to the MWR222.
Reset Click Reset to begin configuring this screen afresh.
10.4.3

PPTP Encapsulation

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure
transfer of data from a remote client to a private server, creating a Virtual Private
Network (VPN) using TCP/IP-based networks.
PPTP supports on-demand, multi-protocol and virtual private networking over
public networks, such as the Internet.
MWR222 User's Guide
110